Page 9 of 16
BA_2005_2_GB_D2
Replacement for BA_2005_1_GB_D2
6. Installation
To set up the pump
Set up the pumpe where it is to be installed so that the oil sight glasses are plainly visible and so that all
parts can be removed and refitted during servicing.
Level the pump and secure.
Fixing thread : M 12, 14 mm deep
To fit the drive
Oscillating drive
Attach the drive rod to the oscillating lever.
Permissible lever movement: min. 10°; max. 60° (corresponding to 1/36 to 1/6 of a revolution of the drive
shaft).
Max. permissible rate of oscillation of lever: 300 double strokes per minute.
Gear box with flange motor
Before installing the electrical wiring, check that the voltage and frequency of the available power supply is
as stated on the rating plate on the flanged three-phase A.C. motor.
Internal transmission ratio of the gearbox : i = 30:1 or 60:1.
Max. permissible speed of rotation of the driveshaft 1500 r.p.m.
Speed of the flanged motor : = 1500 r.p.m.
