SPLIT LEVEL DIVIDED SHELF COMPONENTS
Component
Quantity
Code
Divided Base
1
VRDB92
Shallow Front Plate
1
VRSD9
Deep Front Plate
1
VRDD9
Split Dividers
3
VRSPDV2
2
VR: 12/11
Assembly - Split Level Divided Shelf
1
2
3
4
5
6
Position Shallow Front Plate to required
height of shelf on the front face of the
rack & tap down with a mallet
Repeat with Deep Front Plate but to
the rear of the rack
Slide Divided Base on top of Front
Plates with the holes on the right
hand side
Fit Dividers to required position
To secure dividers in place bend tabs
under shelf
To stop shelf from rising bend tabs on
side of frame
Always start with the lowest shelf & work your way up
If you have any missing components please take note of the part name and code and contact your supplier
Wear appropriate
clothing, protective
gloves and footwear
are recommended
If in doubt please
contact your
supplier
Please read
these instructions
Inspect all packages
for damage and check
that all the components ordered
are included
Assembly should be undertaken
by at least 2 competent persons
Tools required
We recommend
this product is
fixed to the floor
Caution!
During assembly
Take care when
handling heavy objects
Build on a suitable
level floor surface
Allow adequate
working space
and be aware of others
working around you
Dispose of packaging
materials responsibly
Warning
Never climb on the structure
Do no lean ladders,
steps or other
objects against the shelving
Always use safety
steps to reach high
shelves
Load heavy items
on the lower shelves
This product is designed for
hand loading only
Do not use in damp
or wet environments
Ensure that maximum
load carrying capacities
are not exceeded
Please refer
to the loading
chart supplied
for details
