- EN 7 -
B) Tuning
1. Set the Mode button (2) to the FM position.
2. Press
Skip - / + (8, 9) to automatically tune in to the next station.
3. Adjust the Volume (3, 4) to the desired level.
4. Long press the Power Button
(2) for 2 seconds to turn the radio off & go to standby mode.
C) Storing stations in memory positions P01 to P20
1. Set the Mode (2) to the FM position.
2. Tune in to the desired station, press the
Skip - / + (8, 9). The current position number will
flash in the display, e.g. ‘P01, P02… P20’.
3. Press the
Skip - / + to select the station number.
4. Press the MEM (7) to save. 20 radio stations can be stored in memory.
5.
Press the (MEM) to select and listen to a saved station.
Antenna
Extend the wire to obtain the best reception. The user may need to turn or change the position of the
unit to improve reception.
AUX-IN function
1. Press the Power button
to turn on the unit & set the Mode (2) to AUX-In mode.
2.
Plug one end of the 3.5 mm audio cable (not included) into the Aux-in jack (13) on the back panel
and the other end into the line-out jack or headphone jack of an external audio source or computer.
3. Long press the Power Button
(2) for 2 seconds to turn the radio off & go to standby mode.
Bluetooth (optional)
Bluetooth pairing
1. Press the Mode button
to reach “BT”.
2. Select “RR140I” in your mobile phone.
3. If you want to pair a new device: Press BT PAIR to restart the pairing process.
Remarks:
• Don’t discard the electrical and electronic appliances in the regular waste disposal.
• Take them to a collection point.
• Some components in these appliances may be hazardous to health and the environment.
Note :
To save energy, in Aux-in function / Bluetooth function (Optional), when the unit has no sound
output or no button is pressed for 30 minutes, the unit will be switched to stand-by mode automatically.
It can be switched ON by pressing the POWER selector again.
Specifications
Power supply: AC 100- 240V, 50/60Hz
Power consumption: 12W
Radio frequency coverage: FM88.8 – 108 MHz
Operating Frequency: 2402 MHz-2480 MHz
Maximum Peak/RMS Conducted Power: 2 dBm
Warning!
• Make sure that battery is inserted the right way and with the right polarity
• Remove exhausted battery from the product
• The supply terminals should not be short-circuited
• Dispose of battery safely
Содержание 3499550368895
Страница 64: ......