Bigben 3499550368895, Руководство по эксплуатации

Страница: 16 / 64

- EN 6 -
• Press to set the volume output & press Alarm 1 to confirm
• There is dual alarm. Repeat the above steps to set Alarm 2 (4) & select the alarm output. Once the
alarm is set, the alarm display light will be ON.
Turning off the alarm
• To turn off the buzzer or FM radio, press Alarm Off (10).
• The Alarm clock will resume the function at the same time the next day.
Cancelling / Disabling the alarm function:
• Press Alarm 1 or 2, the alarm icon will display.
• In standby mode, press Alarm 1 / or Alarm 2 again to end the alarm function. The alarm function will
be cancelled and the alarm display light will disappear.
• If no key is pressed for 10 seconds, the system will go back to normal mode.
Using the snooze function
When the alarm is ringing or the radio is on, press “SNOOZE”. The Snooze display light will flash. The
alarm will stop, but ring again or the radio will be on every 9 minutes. Press Alarm Off (10) to turn off
the alarm and the Snooze indicator light will be also off.
Dimmer control (LED Display)
• Press Dimmer to control the brightness of the display.
•
There are 3 levels: High level (brightness) Low level (Dim light) OFF.
NAP
• In standby mode, press NAP (5). The bell will ring after the selected time.
• It will start to count down from the default 90 minutes. There are different options for the user: 90,
80, 70, 60, 50, 40, 30, 20, 10 & OFF.
• When the bell rings, press NAP or (2) again to turn off the sound. To cancel the NAP timer
function, press [5] & select OFF.
Sleep
• When the radio is ON, press Sleep (5). The sound/radio will stop after the selected time.
• It will start to count down from the default 10 to 90 minutes. There are options for the user: 90, 80,
70, 60, 50, 40, 30, 20, 10 & OFF.
• To remind you of the Sleep function, the LED will display the sign (SLP) with the selected minutes
after the user has set Timer.
• If user wants to cancel the function, press Sleep (5) again and select OFF.
Operating the radio
A) Auto scan
1. Press the Power button to turn on the unit & select FM Mode (2).
2. Press the button (10) for 2 seconds to start the AUTO SCAN function and automatically
search for radio stations for 3 minutes. The screen displays the digits and station numbers. Once
complete, the unit will store a maximum of 20 preset stations.
3. Press the MEM to select the desired station.