Bigab T-7 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 42

Bigab T-7 Скачать руководство пользователя страница 33

Dump trailer T-7

3

1

© 2012 FORS MW Ltd

maInTenance/servIce

general:

Maintenance must be performed at regular intervals for your safety and trouble free use.

Maintenance can be carried out without any special tools. Most of the steps can be done by the user.

Localise the problem as clearly as possible to avoid opening the system if this is not absolutely

necessary.

Dismantled parts should not come into contact with dirt.

Keep spare parts in their packaging until they are needed for installation.

We recommend trained service personnel carry out the adjustment and repair of valves.

Daily maintenance:

Visually inspect the load equipment. Note any defects that could affect your safety. Repair any defects.

Check the towing eyelet's safety features carefully.

Check to ensure there are no leaks in the hydraulic system and that there are no damaged hoses.

Work through each function.

Check the oil level.

Weekly maintenance:

Wash the trailer regularly with a sponge or soft brush and mild soap solution.

Never wash with high-pressure hot water. This dissolves the grease at the bearing points.

Check the trailer's operation.

Check the hydraulic pressure.

Check the brakes are working reliably.

«
...
31
32
33
34
35
...
»

Содержание T-7











































Отзывы:

Нет отзывов