Bigab T-7, Инструкция по эксплуатации, Страница: 12 / 42

Dump trailer T-7
12
©
AS
FORS MW
safeTy regulaTIons
ImporTanT!
READ THE ENTIRE INSTRUCTION MANUAL BEFORE USING THE TRAILER. CONSULT THE
MANUAL IF YOU ENCOUNTER ANY PROBLEMS. THE TRAILER HAS A DATA PLATE.
BEFORE USING THE TRAILER, MAKE SURE THAT THE FACTORY SETTINGS HAVE NOT
BEEN CHANGED AND THAT NO PARTS HAVE COME LOOSE DURING TRANSIT. MAKE
SURE THAT ALL SAFETY FEATURES AND SIGNS ARE IN PLACE.
haZarDous areas
To avoid injuries or damage while working with the trailer, the dump trailer must be
operated by only one person. Do not allow anyone inside the trailer's hazard zone,
which is 8 m
around the trailer.
Never let anyone stand behind or by the side of the trailer when tipping the trailer bed.
Warning – risk of crushing due to moving parts!
Unauthorised persons are not permitted near the machine when it is in use or being repaired. It is
strictly forbidden for anyone under the influence of alcohol or drugs to work with the trailer.
Trailer safety
To ensure the safe use of the product, for trouble-free operation and for the warranty to be
valid, maintenance must be carried out in accordance with the service described in the chapter
"Maintenance/Service".
The trailer must be loaded evenly and must be on level ground when tipping. Consult the section
"Tipping the trailer" to avoid overturning. The trailer is equipped with lashing loops.
Check the locking pins before tipping.
Do not remove the tipping cylinder's oil hose during tipping.
The estimated coupling load from drawbar to tow hook at maximum and evenly distributed load is
1260 kg.
The towing eyelet is adjusted to the tow hitch on the towing vehicle. It is very important that the
towing eyelet is checked for defects every time the trailer is used. The towing eyelet must be replaced
at least once a year. It is the user's responsibility to ensure that this is done.
note!
Never weld onto the
towing eyelet, as this will change the material's strength.