OPERATION SEQUENCE
3
The scale of the cutter direction
Line marker
The scale of the
cutter angle
Adjust the line marker to the cutter angle that you wish to set.
The angle without (example: 15 ) and the angle with
_
(example: 15 ) indicate the same cutter angle.
Use the enclosed Setting Disk to precisely adjust the
cutter direction.
Adjusting the cutter angle changes the cutter direction also.
Read the same value of the scale of the cutter direction
with the value of the scale of the cutter angle you set, and
check that the values of the scales match each other.
In the case the cutter angle is adjusted without , check
that the scale of the cutter direction is also without . If the
cutter angle is adjusted with , check that the scale of the
cutter direction is also with .
How to adjust
the cutter angle
How to check
the cutter direction
How to adjust
the cutter direction
Installation of
the cutting tool
For details, consult
P4 - P7
For details, consult
P9 - P10
For details, consult
P8
For details, consult
P11
Angles with
Angles without
