Big Lift D40, Эксплуатация, обслуживание, запасные части

Страница: 29 / 132

BL-D40-0515 - 01-27-2019 4-11
4-2.4.3. Parameter Change
To change a parameter proceed as follows and refer to
Table 4-4 :
1. Connect the Zapi Handset, refer to paragraph
4-2.1.
2. Press the ROLL down button (1, Figure 4-5 ) and
the ENTER button (3) at the same time to enter
the MAIN MENU.
3. Press the ROLL down button (1) or the ROLL up
button (2) to find the PARAMETER CHANGE dis-
play.
4. Press the ENTER button (3) to view the parame-
ters.
5. Press the ROLL down button (2) or the ROLL up
button (1) to find the parameter to be changed.
6. Press the SET up button (5) or the SET down but-
ton (6) until the desired value setting is reached.
The parameter is now set at the desired value.
7. Press the OUT button (4) to exit the parameters.
Figure 4-5 Zapi Handset
Table 4-4 Parameter Adjustments
R6624
Parameter Factory Setting Description
ACCELER. DELAY LEVEL = 8 Level 0 to 9. It determines the acceleration ramp. At Level 9 the
truck takes a long time to accelerate.
RELEASE BRAKING LEVEL = 5 Level 0 to 9. It controls the deceleration ramp when the travel
request is released. At Level 9 the truck brakes abruptly.
INVERS. BRAKING LEVEL = 4 Level 0 to 9. It controls the deceleration ramp when the direction
switch is inverted during travel. At Level 9 the truck brakes
abruptly.
PEDAL BRAKING LEVEL = 9 Level 0 to 9. It controls the deceleration ramp when the travel
request is released and the brake pedal switch is pressed to its
maximum. At Level 9 the truck brakes abruptly.
SPEED LIMIT BRK LEVEL = 1 Level 0 to 9. It controls the deceleration ramp when the accelerator
has turned down but not completely released. At Level 9 the truck
decelerates abruptly.
BRAKE CUTBACK LEVEL = 5 Level 0 to 9. It controls the deceleration ramp when the a speed
reduction input becomes active and the motor slows down. At
Level 9 the truck decelerates abruptly.
MAX SPEED FORW 100 Hz Typically from 90 Hz to 160 Hz. It determines the maximum speed
in forward direction.
MAX SPEED BACK 100 Hz Typically from 90 Hz to 160 Hz. It determines the maximum speed
in backward direction.