Big Dutchman Dry Rapid DR 1500, Монтаж и эксплуатация, Страница: 151 / 185

Release for volume dispenser
Page 141
DR 1500
Edition: 08/10 M 4021 GB
Figure 12-13: Code no. 83-00-1683
The electrical stop control XLSD (pos. 5) limits the stroke and stops the winch motor at
two positions that can be pre-set with limit switches. The winch motor is turned off, as
soon as it reaches its final position or in case of overstressing.
Technical data
Assembly
During the assembly, always make sure that:
• the winch motor sits tightly but that there is enough freedom of movement at its
holding straps
• it is supported in the bushes of the seat that twist is prevented
• the motor is mounted at the correct angle to the fastening levels
• the drive is mounted with the right pin bolt sizes
• is assembled with screws and nuts made of steel
• is protected against loosening of screws and nuts.
max. capacity: 2000 N
Voltage: 24 V
max. current consumption: 2 A
Protective system: IP 51
1
2
3
4
5
6
7
8
1 - connection cable
2 - rear fastening
7 - piston rod eye