Big Daishowa DynaForce, Руководство по эксплуатации, Страница: 20 / 24

18
● Measured values may vary due to slight difference in length of each pullstud. If more stable
measurement is required, always use the same piece of pullstud.
● If a pullstud is tightened too much, excessive load is applied to the measuring element.
Hand-tightened installation is recommended.
● Dyna Force is not capable of automatic tool change. Care should be taken not to get your finger caught
in the spindle when installing the measuring device.
● Never rotate the machine spindle.
● Keep the measuring device and display unit dry, as they are not water resistant.
● Measuring device: Temperature compensation range: 0°C to 60°C
Waterproof performance: Not more than drip-proof
Display unit: Operating temperature: -5°C to 40°C Operating humidity: 20 to 85%RH
(Condensation should be avoided.)
Never exceed the above ranges.
● Be sure to turn off power after use.
● Replace both (2) AA batteries at the same time.
● Dyna Force is a precision instrument. Handle carefully and avoid any drop and excessive impact.
Clean, provide rustproof treatment and store the equipment in the exclusive case after use.
● Never disassemble Dyna Force devices, as they are precision instruments. Warranty is void
and performance is worsened once disassembled.
● Remove batteries when stored for an extended period.
● Stop use and consult with our agent for inspection or repair in case of any failure.
Dyna Force is a measuring instrument. Periodic inspection and calibration are required.
(Once a year as a guide, though it depends on frequency of use.)
Calibration certificate and traceability chart are available at cost. Contact our agent.
5. CAUTIONS