Big Button BB40, Руководство пользователя

Страница: 7 / 11

12 13
Programming Combo Device Codes
Some Combo devices (e.g. TV/VCR, TV/DVD,
DVD/VCR, etc.) will require you to set up two
different Mode buttons to control both parts of the
Combo device. For example, if you have a TV/
DVD Combo, you might need to set up one code
under the
TV button to control the TV part AND
a separate code (under any other Mode button) to
control the DVD part.
Volume/Mute Control and Punch-Through
Feature
This remote lets you select which device Mode
controls your Volume/Mute buttons. The remote is
initially set (factory default) for all device Modes
programmed with “
Visual ” codes (e.g. TV, VCR,
DVD, DVR, SAT & CABLE) and “ Audio ” codes
(e.g. CD & AUDIO) to use their own Volume/Mute
control if present. If the programmed “
Visual ”
code has no Volume/Mute operation of its own
then those buttons will punch-through control to
the
TV Mode device without needing to change to
TV Mode. Please refer to the next page for more
information.
Any Mode chosen for Volume/Mute control
MUST have its own Volume/Mute function or
the Volume/Mute buttons will do nothing.
Setting ALL Volume/Mute Control to any one
Mode
This routine can set all Modes to “punch-through”
to any one chosen Mode for Volume/Mute button
control without the needing to change to that
Mode.
1. Press and hold the SETUP button until the
green indicator under a mode button stays on,
then release the
SETUP button.
Setup, cont.
2. Press and hold the MUTE button until the
green indicator blinks off, then release the
button.
3. Press and release the desired Mode button ( TV ,
SAT/CBL , etc.) for Volume/Mute control, the
green indicator for that mode blinks then stays
on.
4. Press and release the MUTE button and the
green indicator turns off. The green indicator
will blink rapidly for three seconds if the Mode
you have selected has no Volume/Mute control.
5. All other Modes will now punch-through to
your chosen Mode for Volume/Mute control.
6. All “Visual” and “Audio” programmed Modes
will now punch-through to the respective
Modes you have chosen for Volume/Mute
control.
Setting any Mode to use its own Volume/Mute
Control
This routine can set any Mode to use only its own
Volume/Mute control. Note - If your chosen Mode
has no Volume/Mute functions of its own then the
Volume/Mute buttons will do nothing.
1. Press and hold the SETUP button until the
green indicator under a mode button stays on,
then release the
SETUP button.
2. Press and hold the MUTE button until the
green indicator blinks off, then release the
button.
3. Press and release the desired Mode button ( TV ,
SAT/CBL , etc.), the green indicator for that
mode blinks then stays on.
4. Press and release the VOLUME- (Down)
button, the green indicator blinks then stays on.
5. Press and release the MUTE button and the
green indicator turns off.
6. All “Visual” and “Audio” programmed Modes
will now punch-through to the respective
Modes you have chosen for Volume/Mute
control.
Setup, cont.