Big Button BB40, Руководство пользователя

Страница: 6 / 11

10 11
If your product does not respond after you
have tried all the codes for your brand, or if
your brand is not listed, try searching for your
code by following these steps.
1. Manually turn on the device (TV, Cable
Box, etc.) to be controlled.
2. Press and hold the SETUP button until a
green indicator stays on, then release the
SETUP button.
3. Press and quickly release the desired mode
button ( TV , SAT/CBL , etc.). The green
indicator for that mode blinks off once.
4. Press the CHANNEL UP button repeatedly
(up to 300 times) until the device to be
controlled changes channel. The green
indicator blinks off with each button press.
If you accidentally overshoot the code
required, press the
CHANNEL DOWN
button to backtrack through the library
until the device changes channel. Pressing
CHANNEL UP changes direction to
forward again.
5. Press and release MUTE to install the code.
Code Search
Code Identi  cation Feature
The Code Identi fi cation Feature allows you to
identify the 4 digit library code stored under
your device key. For example, if you want to
fi nd out what 4 digit code is stored under your
TV device key, follow the six steps below:
1. Press and hold the SETUP button until the
green indicator under a mode button stays
on, then release the
SETUP button.
2. Press and release the desired mode button
( TV , SAT/CBL , etc.). The green indicator
for that mode blinks, then stays lit.
3. Press and release the SETUP button. The
green indicator blinks off.
4. To fi nd the fi rst digit for the code stored
under the mode key pressed in step 2, press
each numeric key from
0-9 in turn. When
the green indicator blinks off the number
you pressed is the
fi rst digit for the code
you are searching for.
5. To fi nd the second digit, repeat step 4, this
time when the green indicator blinks off this
is the second digit.
6. Repeat step 4 to fi nd the third and fourth
digits.
Write your codes down here for easy reference later.
Type Type stored Code
TV TV
SAT/CBL
DVD/VCR
DVR
Direct Code Entry, cont.
Most users will store DVD codes under the
DVD/VCR button, Cable or Satellite codes
under SAT/CBL , etc. If (for example) you
want to store a CD code under DVD/VCR ,
fi rst follow the procedure for Direct Code
Entry (previous page) and press DVD/VCR in
step 2 of Direct Code Entry, then enter ANY
CD code in step 3 of Direct Code Entry. Then
follow the steps above for Code Search.
Note :
If the device does not have a CHANNEL UP
button, use PLAY (VCR only) or POWER
instead. Code Search starts from the currently
stored 4 digit number under that mode.
Direct Code Entry, cont.