8’–24’ POWERFOIL
®
X2.0 & POWERFOIL
®
X2.0PLUS FANS
41
WWW.BIGASSFANS.COM ©2012 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
8’–24’ POWERFOIL
®
X2.0 & POWERFOIL
®
X2.0PLUS FANS
Wall Controller Operation (cont.)
To select the fan’s command source,
press the LOCAL/REM button. The fan controller is preprogrammed to accept
digital and analog inputs from customer automation systems for start/stop and speed commands, or to be directly
controlled from the wall controller. Upon startup, the fan puts priority on external commands provided by automation
systems or other fans.
Note: To access all buttons on the controller, the controller cover must be removed.
To operate the fan from the wall controller,
press the LOCAL/REM button to make sure that the LOC indicator is illuminated. The
RUN, STOP, and FWD/REV buttons are functional only when the LOC indicator is illuminated.
Note: To access the LOCAL/REM button
on the controller, the controller cover must be removed.
Toggling the fan’s command source
STOP
RUN
FWD
REV
REM
LOC
U
F
H
EXTERNAL AUTOMATION
CONTROL ENABLED
STOP
RUN
FWD
REV REM
LOC
U
F
H
WALL CONTROL COMMANDS
ENABLED
“R E M” is Illuminated
“L OC”
is Illuminated
LOCAL
REM
LOCAL
REM
LOCAL
REM
Cycling through the LED display modes
To cycle through the possible display options on the wall controller,
press the MODE button repeatedly. Below are
the possible screens in the order in which they appear on the display.
Note: To access the MODE button, the controller
cover must be removed.
STOP
RUN
FWD
REV
REM
LOC
U
F
H
FAN MOTOR CURRENT
STOP
RUN
FWD
REV
REM
LOC
U
F
H
MEMORY READ/WRITE
STOP
RUN
FWD
REV
REM
LOC
U
F
H
FAN FREQ. COMMAND
STOP
RUN
FWD
REV
REM
LOC
U
F
H
FAN ACTUAL FREQ.
STOP
RUN
FWD
REV
REM
LOC
U
F
H
FAN RPM
(start-up screen)
D
MODE
MODE
MODE
MODE
MODE
MODE
