8’ - 24’ POWERFOILPLUS™, POWERFOIL™, & WICKERBILL FANS
WWW.BIGASSFANS.COM ©2010 DELTA T CORP. DBA BIG ASS FAN ALL RIGHTS RESERVED
21
WWW.BIGASSFANS.COM ©2010 DELTA T CORP. DBA BIG ASS FAN ALL RIGHTS RESERVED
8’ - 24’ POWERFOILPLUS™, POWERFOIL™, & WICKERBILL FANS
Installing Guy Wires
Guy wires may not be included in your fan order. They are intended to constrain the fan’s lateral movement and
are included with fans that have extension tubes 4 ft (1.2 m) or longer.
If you are not installing guy wires, proceed to “Replacing Allen-Head Plug” (pp. 23-25).
1. Attach Locking Carabiner to Motor Frame
Secure the locking carabiner to the motor frame as shown.
Gripple/Eyebolt Hardware (BAF-Supplied):
a. (4) Carabiners
2. Attach Beam Clamp
Attach the beam clamp to an I-beam or angle iron. The guy wire must
be at a 30
o
-45
o
angle from the roof to the extension tube. Place the
beam clamp accordingly.
Fasten the small eyebolt and nut onto the beam clamp (the nut will be
on the outside of the beam clamp).
Loop the guy wire through its crimped end to secure it to the eyebolt
as shown.
Gripple/Eyebolt Hardware (BAF-Supplied):
a. 1/4” Beam Clamp
b. 1/4-20 x 1” Eyebolt
c. 1/4-20 Hex Nut
d. Guy Wire
Beam Clamp
a
d
c
b
