Warning!
Do not attempt to start operating the
bread maker, before it has either coo-
led down or warmed up.
Please also read the safety instructions
in Section 4 in this regard.
Important
The parts and accessories of the
appliance should not be washed in a
dish washing machine.
Casing, lid and baking area:
Remove all particles left behind inside
the baking area using a wet cloth or a
slightly wet soft sponge. Wipe the
casing and the lid too with a wet cloth
or sponge. Make sure that the inside
area is fully dry.
Baking moulds and kneading paddles:
The surface of the baking moulds and
the kneading paddles are provided with
a non-stick coating. While cleaning, do
not use any corrosive detergents, clea-
ning powders or objects that may cause
scratches on the surface.
Due to moisture and vapours the surfa-
ce of various parts may undergo chan-
ges in their appearance over a period of
time. This does not affect the quality or
functional performance of the appliance.
Do not use any metallic objects as these
may cause scratches on the non-stick
coating.
Rinse the baking mould with warm water
immediately after taking out the bread. This
prevents the kneading paddles from beco-
ming rigid on the drive shaft.
Tip: If you remove the kneading paddles
before the bread rises for the last time, the
bread can be released from the baking
mould easily.
• For this, open the lid of the appliance
and remove the baking mould. Apply
some flour to your hands to remove
the dough and then the kneading
paddles.
• Put the dough back in its place and
close the lid.
Allow the bread to cool down for 15-30
minutes before you attempt to taste it.
Before slicing the bread, always make sure
that there are no kneading paddles in the
dough.
Warning!
Do not attempt to start operating the
appliance, before it has either cooled
down or warmed up.
If the display on the bread maker shows
"E 01", the appliance is not sufficiently
cooled down.
If the display shows "E 00", the temperatu-
re is too low. Wait till the display disappe-
ars.
Tip: While using the Timer function
especially, make sure that yeast
does not mingle with the moist
ingredients. This may affect the
rising of the dough.
12
12 Cleaning and maintenance
IB_Breadmaker_GB.qxd 04.02.2005 10:14 Uhr Seite 12