Installation, Operation and Maintenance Manual
MAN 604-1A Rev. 6
March 2021
Installation
9
Section 2: Installation
Figure 5
Insert bush + intermediate coupling flange
Drive sleeve
Adaptor flange
Flow line
Drive sleeve
Insert bush
N
.4 h
ole
s flan
ge
N
.8 h
ole
s flan
ge
Insert bush
Housing
Standard position 1
Position 2
Position 3
Position 4
Position 2
Position 3
Position 4
Rotate insert-bush 180° around
vertical-standard position (1)
Rotate insert-bush 180° around
axis A-A, from position (2)
Rotate insert-bush 180° around
axis A-A, from position (1)
Insert bush turned upside down
If required, for the standard models size 0.3 to 6, Biffi can supply an insert bush with
unmachined bore in accordance with Biffi standard table SCN6202. On request the insert
bush bore can be machined by Biffi to couple the valve stem, provided its dimensions
match the maximum stem acceptance of the bush according to Biffi table TN1005,
enclosed. The particular execution of the flange and bushing allow the actuator to be
rotated by 90° in 4 different positions according to the Figure 5.
The Biffi insert bush with 2 external keys at 45° allows to position the keyway for the valve
every 90°. Consequently, actuator can be mounted in 4 positions at 90° on top of the
valve. For biggest actuator models, the bore of the yoke can be machined according to the
dimensions of valve stem.
Table 5.
Snap ring
