INTRODUCTION
The B
IESEMEYER
®
T-S
QUARE
®
Commercial fence system includes the fence assembly, front rail, rear rail
and front guide tube along with the mounting hardware for assembling the fence system to many
different types of table saws. Depending on the model ordered, an accessory leg kit may also be
included. An accessory right extension table and support legs are also required. The right extension
table may be purchased seperately or may be constructed by following the diagram in this manual. If
the leg kit is not included with the fence, it may be ordered seperately as well.
IMPORTANT:
The
B
IESEMEYER
®
T-S
QUARE
®
Commercial fence system is designed to be used only with a supporting
extension table and leg kit.
UNPACKING
Carefully unpack the B
IESEMEYER
®
T-S
QUARE
®
Commercial fence system from the shipping cartons. Fig. 1
illustrates all the items supplied with the guide set. Fig. 2 illustrates all the items supplied in the fence
box and the accessory right hand extension table. Support legs shown are only provided with Part No.
78-200. NOTE: If you did not purchase the right extension table for use with your T-S
QUARE
®
fence
system, refer to the next section titled “Constructing Extension Table” for information on constructing an
extension table.
1. Guide Tube
2. Front Rail
3. Rear Rail
2
Fig. 1
1
2
3
