Bien Air 1700544-001, Инструкция по эксплуатации

Страница: 44 / 84

39
12.3 iPod touch®/iPad mini® and iOptima
INT
connection / disconnection conditions
12.3.1 Disconnection
If the iPod touch®/iPad mini® is disconnected, the iOptima
INT
system is in standby mode (micromotor stopped).
⚠
CAUTION
The iPod touch®/iPad mini® must never be disconnected from the
iOptima
INT
dental unit during operation! If the iPod touch®/iPad
mini® is disconnected during an operation, the micromotor stops
immediately.
12.3.2 Connection
The micromotor can start only when the iPod touch®/iPad mini®
is connected and the application is in operative mode.
⚠
CAUTION
If the footpedal is pressed before entering in operative mode, an
alert message «Please release pedal…» will be displayed. The
micromotor will not start to run until the footpedal is released
and pressed again.
12.3.3 iOptima
INT
unit switched ON
If the iOptima app is running and the iPod touch®/iPad mini®
plugged to the iOptima
INT
(switch ON):
• The iPod touch®/iPad mini® will charge up (even if the app is
not running);
• The sleep mode is deactivated;
• The micromotor can be operated with the pedal (iOptima
app in operative mode).
12.3.4 iOptima INT last set operation memory
For iOptima
INT
, the operation displayed by default is associated to
the active motor. Memory of each operation set at last usage for
each motor is kept (e.g. a user who has two motors can leave a
blue CA on «motor 1» and a red CA on «motor 2» and, depending
on which motor is activated, the corresponding modes are
automatically activated).
12.3.5 System malfunction
If the iOptima
INT
system freezes or malfunctions in any way, it is
possible to reboot the entire system by pushing on the reset
switch button.
The reset switch button is located near the Apple device and is
easily accessible at all times. For a picture of the reset switch
button, please refer to
FIG. 2 .
FIG. 2