27
SANIBLASTER
ENGLISH
6.6 AT THE END OF THE JOB
1. Carry out the maintenance procedure shown at point
8. REGULAR MAINTENANCE
.
2. Turn off all the switched, unplug the machine.
3. Put the machine in a clean and dry place.
7. EXAMPLE OF USE OF ENVIRONMENT'S SANITIZATION WITH HY
-
DROGEN PEROXIDE
Before the treatment, wear all the necessary personal protective equipment: latex gloves,
protective glasses and mask, cotton clothes.
1. Close all the windows of the environment and make sure that persons/animals are not in.
2. To sanitize insides with Hydrogen Peroxide (diluted as by specifications) it is recommended
to address the nebulizing jet upwards and not directly on the surface: the produced "mist"
will saturate the relative humidity of the room reaching each horizontal and vertical surfa-
ce. If needed, address the spray under tables and desks.
3. After the treatment, exit the room and close the door. Wait 15 minutes to access.
4. Wait for the natural drying of surfaces, if necessary manually dry with a cloth.
8. REGULAR MAINTENANCE
ATTENTION: BEFORE ANY MAINTENANCE/CLEANING OPERATION, UNPLUG THE MACHINE.
1. Clean the fluid pump and the hoses by nebulizing only clean water (no detergent/product
for 1 minute.
2. Put the machine in a clean and dry place, protected from the wheater.
THIS CLEANING OPERATION MUST BE CARRIED OUT AFTER EACH USE. PENA IL DECADIMENTO DELLA
GARANZIA. IF NOT, THE GUARANTEE WILL DECAY.
