Bieffe FOREVER BF086, Руководство по эксплуатации и обслуживанию, Страница: 43 / 52

43
FOREVER
ENGLISH
11. INSTALLATION AND USE MODEL BF115
11.1 INSTALLATION
ATTENTION: read and follow carefully all the safety instructions previusly reported, pay attention to the in -
structions about the electrical system to which the appliance is connected.
1.
Insert the tubes (sliding legs) (10) into the supports (7). Lock the tubes using the two knobs
2.
Place the cabinet (B) under the board (A) and lock it using the four knobs.
3.
Insert the tubes (sliding legs) (10) into the cabinet supports. Screw the leg bracket (6) under
the board. Tighten the knobs placed on the cabinet supports.
11.3 USE
ATTENTION: ENSURE THAT THE ELECTRICAL SYSTEM IS EQUIPPED WITH A DIFFERENTIAL SWI-
TCH (LIFE-SAVING SYSTEM) AND WITH A PROTECTIVE CONDUCTOR (GROUNDING SYSTEM).
1.
Set the temperature of the ironing board with the knob (3) according to the type of fabric
to be ironed (optimal temp. 50/70°C).
2.
To activate the vacuum motor press on the pedal (9).
3.
To avoid formation of condensation inside the table, only iron when the ironing board is hot
and act on the vacuum pedal every time steam is necessary.
4.
At the end of the job, turn off the switch (2), unplug the machine from the outlet and place
it in a clean and dry place.
11.2 ACTIVATION
1.
Place the cabinet (B) in a safe place and in vertical position. Extract the sliding legs (10).
Place the ironing board (A) on the cabinet and lock it with the hook (5).
2.
Connect the power cable (8) to a grounded outlet and ensure that it is fully extended and
not twisted. Do not pull the power cable, crush it and/or stretch it.
3.
Activate the general switch (2).