Bieffe FOREVER BF086, Руководство по эксплуатации и обслуживанию, Страница: 39 / 52

39
FOREVER
ENGLISH
9. INSTALLATION AND USE MODEL BF115
9.1 INSTALLATION
ATTENTION: read and follow carefully all the safety instructions previusly reported, pay attention to
the instructions about the electrical system to which the appliance is connected.
1.
Place the cabinet (B) on a flat and stable floor.
2.
Extract completely the sliding legs (7).
3.
Lift up the ironing board (A).
4.
Screw the the iron support board (1) to the control box (2).
5.
Connect the power cable (5) to a grounded socket.
6.
Press the general switch (3).
9.2 ACTIVATION
1.
Place the cabinet (B) in a safe place and in vertical position. Extract the sliding legs (7). Place
the ironing board (A) on the cabinet.
2.
Screw the control box cover to the control box (2).
3.
Connect the power cable (5) to a grounded outlet and ensure that it is fully extended and
not twisted. Do not pull the power cable, crush it and/or stretch it.
4.
Activate the general switch (3).
9.3 USE
ATTENTION: ENSURE THAT THE ELECTRICAL SYSTEM IS EQUIPPED WITH A DIFFERENTIAL SWI-
TCH (LIFE-SAVING SYSTEM) AND WITH A PROTECTIVE CONDUCTOR (GROUNDING SYSTEM).
1.
Set the ironing board with the knob (4) temperature according to the type of fabric to be
ironed (optimal temp. 50/70°C)
2.
To activate the vacuum motor press on the pedal (6).
3.
To avoid formation of condensation inside the table, only iron when the ironing board is hot
and act on the vacuum pedal every time steam is necessary.
4.
At the end of the job, turn off the switch (3), unplug the machine from the outlet and place
it in a clean and dry place.