45
BF4000 VACUUM
ENGLISH
8. INSTALLATION
1.
Place the machine BF4000 VACUUM where needed and insert the parking brake (A) to
block any movement.
2.
Add diesel fuel into the tank (C), water into the tank (B) and anti-limescale into the tank (D).
3.
Once checked that the technical features of the electricty (Volt/Hz) matches with the plate
fixed on the machine, connect the plug (E).
NON-COMPLIANT EXTENSIONS AND SOCKETS ARE FORBIDDEN. THE ELECTRICAL SYSTEM TO
WHICH THE APPLIANCE WILL BE CONNECTED MUST BE IN COMPLIANCE WITH THE EXISTING
LAWS OF THE COUNTRY.
4.
We recommend a differential circuit breaker with a 30mA sensitivity.
5. Check for the boiler draining tap (F) to be closed.
6.
Connect the water feeding hose (diameter not less than 14mm) to the pump inlet (G).
MAKE SURE THAT THE SUCTION FILTER INSIDE THE SUCTION CONNECTOR IS ALWAYS CLE-
AN. A DIRTY FILTER DOES NOT ALLOW A PROPER WATER FEEDING, CAUSING THE PUMP TO
FUNCTION BADLY, AND WITH UNAVOIDABLE RISKS OF QUICK WEARS AND BREAKS OF THE
INTERNAL MECHANISM.
ATTENTION
Ground connection is mandatory
ATTENTION
Use ONLY diesel fuel
