2. Press Wash, Bidet, Power
Wash Buttons.
Selected function can be used as
desired. After Wash, Bidet and Power
Wash, dryer works automatically. For
sitz bath, press Wash again. Sitz bath
works for 5 minutes at set temperature.
3. Press the Dry Button
Hot air indicator light will turn on. Dryer
works for 3 minutes. Dryer temperature
is adjustable by pressing “HI” and “LO”
buttons. It is recommended to wipe off
the water on your bottom before
operating the dry function for improving
the dry effect.
1. Sit on the Toilet Seat
Be sure to sit on the user sensor of seat.
If the sensor is not occupied, functions
will not work. Deodorizing function
starts automatically.
6. Pulse Wash
When pressing Pulse button during
the operation of Wash, Bidet, and
Power Wash, water pressure will
repeat High/Low levels for smooth
pulsating wash.
11. Deodorizing Function
When sitting on the seat, the
deodorizing function starts automatical-
ly. Deodorizing function can be
controlled by the following methods.
• While holding the Stop button, when
pressing the hot water button once,
deodorizing fan will rotate at slow
speed during and after the usage of
bidet.
• While holding the Stop button, when
pressing the hot water button twice,
deodorizing fan will rotate at slow
speed during the usage of bidet, and at
high speed when leaving the seat.
• While holding the Stop button, when
pressing the hot water button 3 times,
deodorizing fan will rotate at high
speed during and after the usage of
bidet.
After the usage of bidet, the
deodorizing function will operate for 1
minute.
12. Nozzle Cleaning
While not sitting on the seat, and
pressing the Wash button 3 times, the
nozzle will move forward at its
maximum distance so that the user can
clean it easily (it will return after 2
minutes). When pressing the Stop
button, the nozzle will return and
operate a self-cleaning operation.
13. Night Light
Blue LED light provides enough
brightness to see the toilet without
turning on the bathroom light. Night
light can be turned on/off by pressing
“HI” button for three seconds, while the
bidet is not occupied.
7. Water Pressure Control
Pressing HI/LO button enables the
control of water pressure. When any
foreign material blocks the water filter,
it may cause low water pressure. Check
to ensure stable use.
8. Nozzle Position Control
Nozzle position can be controlled by
pressing FR/BK.
WARNING!
Consult your doctor before using Power
Wash function in situations of anal
disease/surgery.
User Instructions
Instructions and caution statements for
cleaning, user maintenance, operations
recommended by the manufacturer, such
as lubrication or nonlubrication, and a
warning to the user that any other
servicing should be performed by an
authorized service representative or that
the product has no user serviceable
parts. The manual or other literature
packaged with the product shall also
indicate the product is for household
use.
Specific instructions for the proper
method of cord storage, total product
storage, and the like when the product is
not in use; and for cord care while in
use, such as for hand supported
products, untwisting, and the like.
9. Child Function
For child use, press the Child button
first (Child light will turn on), nozzle
position water pressure and seat
temperature will be adjusted. Nozzle
moves forward more than adult wash.
Water pressure is weaker than adult
wash. Seat temperature drops down to
93° F from set level.
10. Energy Saving Function
Automatic Energy Saving function
• When pressing the button once, it
enters into automatic energy saving
mode. (Yellow LED turns on)
• When seat is not occupied, the seat
will be heated at minimum heating
temperature.
• When sitting on the seat to use, it
turns to the pre-designated
temperature; when leaving the seat, it
returns to the automatic energy saving
mode.
Learning Energy Saving Function
• When pressing the button twice, it
enters into the learning energy saving
mode. (Green LED turns on)
• Learning energy saving enables
MICOM to detect the time framed used
by users and keeps the memory for the
next 5 days. It releases the energy
saving function 15 minutes in advance
at each time frame and keeps the
pre-designed temperature for an hour.
• After an hour, the unit enters the
energy saving mode.
When pressing the button 3 times, the
energy saving mode will be released.
*This product adopts the instant water
heating method, and does not consume
the electricity to operate the water
heater while not used.
How to Use the Product
6
User Sensor
4. Press the Stop Button
Any operation will stop. Press Stop
for 3 sec. to turn off unit.
5. Massage Wash
When pressing the Massage button,
nozzle will move back and forth and
wash a wider range. When pressing
the Child button during the operation
of Massage, the amount of movement
can be adjusted within 5 levels.
