Installation
Trial Operation
4
1. Remove the seat from
existing toilet body.
Release the nuts, and then remove
the seat and cover from it. Keep the
removed seat, cover and nuts in a
proper place in case you need to use
them again.
2. Close the water feed
valve by turning it
clockwise, and then
drain the toilet water
tank out.
3. Remove the water feed
pipe and then install
T-valve.
8. Insert the deodorizing
cartridge into the bidet
body
4. Connect the toilet-use
hose.
Install T-valve
Toilet-use hose
Water supply hose
It is OK to use
Teflon tape or
similar thread
sealing compounds
for a better seal.
6. Push the main body
toward the Catch Plate
completely.
7.Connect the bidet-use
hose to the bidet body.
1. Open the water feed
valve by turning it
counter-clockwise.
2. Be sure of no leakage
around the hose
connection.
3. Be sure that the nozzle
comes and retracts when
powered on.
Don’t plug the power cord with wet
hands. Risk of electric shock.
4. When the unit is powered
on, water tank will be filled
immediately. Check if water
comes out from drain hole
for 1~2 sec.
Push it back until you hear a click.
When the product is not installed
well, the seat may come apart.
T-valve
Bidet Water
Supply hose
Top mount metal bolt
Bracket Holder
Catch Plate
Top Mount Rubber Nut
Align
5. Fix the bracket onto the
toilet first.
Adjust the seat and the front part of
toilet back and forth so that they
correspond before fastening the nuts.
