I
NSTALLATION
C
OMFORT
A
IR
C
URTAIN
14
3. Connect the unit to the power supply (section
2.7
).
4. Install the control panel, the outdoor sensor and (any
optional) connections to external controls (section
2.8
).
5. Finish the unit (section
2.9
).
6. For models for connection to a Daikin direct expansion system
CA
2
V and CA
2
Q:
Connect the air curtain unit to the Daikin system
(section
2.6
)
.
7. Switch on the power supply.
8. During the first start, the installation guide is started.
Follow this through to carry out the most frequently
needed settings.
If the installation guide is not displayed, it can be started
with
Menu
>
Maintenance
>
Installation
.
9. Check the function of the unit (section
2.10
).
General instructions
Some parts of this section are applicable only to certain
models. Where this is the case, it will be indicated. If no
specific model is referred to, the description applies to all
models.
Note:
n
Make sure you perform all installation operations that are
required for your unit.
Check the type plate. Refer to section
1.4.3
if you are not
sure about the model or type of your unit.
Note:
n
Protect the unit from damage and ingress of dust, cement,
etc. throughout the installation. You can, for instance, use
the packaging for protection.
2.4
Fixing the unit
2.4.1 Determining the location of the unit
Danger:
d
Do not install the unit in a vertical position.
