Bibby Sterilin Stuart SM27, Инструкция по эксплуатации

Страница: 6 / 29

4
Maintenance and Servicing
WARNING: Ensure the batteries are
removed and /or the unit is
disconnected from the mains adapter
before attempting maintenance or
servicing.
Cleaning
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh abrasives or abrasive cleaning agents.
Avoid strong acids and solvents on the ABS case.
Spares and Accessories
The following spares and accessories are
available from Bibby Sterilin or your laboratory
dealer:
Description Catalogue Number
Mains adapter,
230V ac,UK plug
SM27/1
Mains adapter, 230Vac,
2 pin European plug
SM27/2
Adapter for car cigarette plug SM27/3
For a comprehensive list of parts required by
service engineers conducting internal repairs,
please contact the sales department of Bibby
Sterilin quoting both the model and serial
number.
Repairs
Only spare parts supplied or specified by Bibby
Sterilin or its agents should be used. Fitting of
non-approved parts may affect the performance
and safety features designed in to the
instrument.
Any repairs or replacement of parts MUST
be undertaken by suitably qualified
personnel.
If in any doubt please contact the Technical
Department at Bibby Sterilin at the address shown
on the back cover, or the point of sale.
Bibby Sterilin Ltd.
Stone
Staffordshire
ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121
Fax: +44 (0) 1785 813748
Technical Specification
Max Speed 1300rpm
Capacity litres H
2
O 1.5
Overall dimensions (w x d x h) 150 x 160 x 70mm
Net weight 1.3kg
Electricity supply 4 x alkaline
batteries or 230V,
50 Hz
Battery type 1.5V, size D, ICE
No. LR20
Battery life 6000 hours
continuous use
Warranty
Bibby Sterilin Ltd. warrants this instrument to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of two (2) years. In the event of a
justified claim Bibby Sterilin will replace any
defective component or replace the unit free of
charge.
This warranty does NOT apply if damage is caused
by fire, accident, misuse, neglect, incorrect
adjustment or repair, damage caused by incorrect
installation, adaptation, modification, fitting of
non-approved parts or repair by unauthorised
personnel.