EN
17
OPERATING THE TAMPER T42S
NOTE WHEN USING THE TAMPER T42S
When using the stamper, always hold the jar with one hand!
Using of the tamper you can remove any air bubbles, e.g. when preparing dough, in the jar, without touching the blades.
With the integrated temperature display you can make sure your foods are prepared gently.
Overview
Run the tamper only through the lid opening of the measuring cup. (see Fig. 2, page 1). Use only the provided tamper and
no other
objects to press the mixing content towards the blades. The less water you use, the more you have to work with
the tamper. If you use other objects, the device can be damaged.
Vorsicht
Caution
Benutzen Sie
den Stampfer
nicht
ohne
aufgesetzten
Deckel.
Do not
use the
tampfer without
the lid.
Benutzen Sie
den Stampfer
nur
mit
aufgesetzten
Deckel.
Only use
the
tamper when the
lid is attached.
T42S
Verwendung nur mit / Use only with
Cube + / Cube / Square / Canto
Temperature display
On / Off button
To measure the temperature in the jar, please proceed as follows:
• Switch on the tamper with the On/Off button
• Take the measuring cup off the lid, leave the lid on the jar.
• Now hold the tamper into the jar through the opening.
• The handle of the tamper displays the temperature in °C.
CHANGE THE TEMPERATURE DISPLAY
If the display shows the temperature in °F (Fahrenheit), you can change into °C (Celsius)
by holding the On/Off button of the tamper for 3 seconds.
Содержание Patto Pro
Страница 12: ...DE 12 BERSICHT DES BEDIENELEMENTS 3 6 1 5 4 2 7...
Страница 46: ...EN 12 TOUCH CONTROL PANEL 3 6 1 5 4 2 7...