SPA-UBDX Installation Guide
NOTE:
When mounted horizontally, the ClickPlug gland nut and
U-Bracket may interfere with each other. In this instance, the
ClickPlug needs to be rotated 90° to provide clearance for the
U-Bracket rotation. See image at right. In damp/wet applications
you must use a drip loop to prevent the chance of water traveling
into the gland nut.
The ClickPlug should be oriented as shown below. It can not
be installed upside-down.
ClickPlug Orientation
Attach safety
cable here
Attach Safety Cable
11. Secure the loudspeaker with a safety cable attached to
the loop on the rear. The cable should be mounted to a
secondary structural mounting point close to, and above
the U-Bracket to avoid any kinetic force if the mount
should fail.
NOTE:
The installer is responsible for sourcing the proper safety
cable to meet all applicable local building codes and standards.
11
