SPA-UBDX Installation Guide
Adjust the Tap Switch
9. Rotate the tap switch knob to the
desired setting before you attach
the ClickPlug to the loudspeaker.
CLICK
CLICK
CAUTION:
The ClickPlug fit is very tight and is difficult to
remove, especially if it is oriented toward the side of the
unit. Avoid attaching the ClickPlug until the speaker is fully
installed. If the unit is installed outdoors or in a damp location
make sure a cable drip loop is utilized to prevent any moisture
from migrating into the gland nut.
Attach the ClickPlug
10. Insert the wired ClickPlug into the opening with the plug
top (or side) into the indent under the safety cable loop
first, then "click" it into place by pushing it against the
latch until it is fully seated, and the latch returns to the
"up" position. The general orientation of the ClickPlug
should be with the gland nut pointed down (exception
noted on the next page). It cannot be mounted with the
gland nut pointed toward the safety loop.
IMPORTANT:
The fit is very tight; press on the raised
portion of the ClickPlug rather than the gland nut when
inserting it.
9
10
10
