page 19
Installation and Operation Guide
Qt X Sound Masking System
INTERACTING WITH A Qt X SYSTEM
There are two (2) current methods of accessing and configuring the system
with differing levels of what can be viewed or affected. The front panel of each
unit has very basic functionality - limited to basic information and operating
mode of that particular controller. The web user interface gives the installer/user
additional access to each system and can assign outputs to zones, set levels,
set schedules and security for the system.
Controller Front Panel
The individual control panel menu give you access or control of this:
• FW version number
• Fault status message
• Hostname
• MAC address (Control)
• IP Address (Control)
• Netmask (Control)
• MAC Address (Media)
• IP Address (Media)
• Netmask (Media)
• Zone Audio level
Qt X Web Interface
(online help file <
The web interface allows you access or control to:
• Discover devices and assign them to a system
• Configure a sound masking system
• Create zones and assign outputs to them
• Define the Logic I/O for each controller
• Add and/or configure Audio sources
• Manage and configure Inputs, Zones, and Outputs
• Manage schedule and "Soft Start" planning
• View status and send changes to Zones, Devices, Faults, Outputs, Date/
Time and System Info
• View or make changes to system, device and network settings
• Update Firmware
• Set security (user) access levels
* Items with an asterisk '*' will be included in future firmware releases
