A:
9300 S.W. Gemini Drive Beaverton, OR 97008 USA
W:
www.biamp.com
PRODUCT DESCRIPTION
Biamp’s Cambridge Qt
®
X Series is a complete, all-in-one sound masking
solution that delivers the flexibility, reliability, and ease of installation that
integrators desire. It is engineered to incorporate direct-field technologies,
making the Qt X ideally suited for office environments. Qt X is easily interfaced
with a building’s life-safety system out of the box, ensuring proper coordination
during emergencies.
All models of the Qt X control modules include a sound masking generator,
controller, third octave band equalizer and amplifier with two analog audio inputs.
This allows for distribution of audio from paging controllers and/or (background)
music players, one digital media input (RJ45 Ethernet port), and 3 or 6 analog
output channels (depending on the Qt X model) to connect to sound masking
emitters or speakers.
Qt X 300
and
Qt X 600:
Use direct field devices (Qt Standard or Active Emitters).
The emitters point downward above the listener's head for direct, unimpeded
audio signal. The Qt X 300 control module is a compact three-output controller
suitable for installations of up to 36,000 square feet (3,345 m
2
). The Qt X 600
control module is identical in features and functions yet supports six outputs of
sound masking and audio installations of up to 72,000 square feet (6,689 m²).
Outputs can be assigned to a zone and then the zones are adjusted for masking
and audio levels and spectra. Qt X 300/600 models have "preset" optimized
sound masking spectra for use with Qt Emitters. Additional configuration is
available from a web-based control interface or from a remote desktop leveraging
the unit’s network connectivity with the Qt X software.
The "D" models of each controller (Qt X 300D/600D) will be available in a future
release. They support Dante
®
audio stream inputs and are AES67 compatible.
The Qt X web-based management software provides an intuitive interface
for setup and programming of a Qt X sound masking system. For information
related to this software interface, see Qt X
.
Unless otherwise noted, all installation, set up and use instructions apply to the
Qt X family of control modules (Qt X 300 and Qt X 600).
Cambridge
Qt
®
X Sound Masking System
Installation & Operation Guide
FEATURES
• 3 or 6 outputs of sound masking coverage depending upon the model
• Wall, rack mount and plenum options
• Web-based control interface
• Compatible with active and passive Qt
®
Pro emitters
• Qt X is easily interfaced with a building’s life-safety system out of the box
• "D" models (Qt X 300D/600D) will support distribution of Dante
®
, AES67,
and AVB (enabled in future firmware release)
Models
Qt
®
X 300, Qt
®
X 300D
Qt
®
X 600, Qt
®
X 600D
(D) Dante
®
versions available
in a future release
Connecting people through extraordinary audiovisual experiences™
