Bialetti BLT03, Инструкция по эксплуатации

Страница: 26 / 76

EN
26
4. Use
• Put the kettle (9) onto power base (8), ensuring that both are perfectly
fl at, then plug the appliance in.
• Press down the on/off switch (3), Fig. A, positioning it to “I” (ON); the
switch turns on.
• After the boiling cycle, the appliance turns off by itself.
• By lifting the kettle (9) from the base (8), the power supply stops.
• Move the on/off switch (3) to “0” (OFF) to interrupt appliance function
before water boils.
Attention!
Carry out the fi lling/emptying operations
of water with the boiler removed from its
power base.
DIRT FILTER
The appliance is equipped with a removable fi lter (5), close to the kettle
spout, which facilitates impurity retention.
To extract the fi lter, proceed as follows:
•
Open the lid (1) by pressing the opening button (2), Fig. C.
• Remove the fi lter (5) upwards (Fig. D).
• To position the fi lter (5) back, proceed in the inverse way compared to
removal (Fig. D).
STORING THE APPLIANCE AFTER EACH USE
• After use, when the appliance is unplugged, it is possible to reel the
power cord on the bottom of the power base (8) by letting the cord
pass through the proper slot to lock it (Fig. A).