Page | 8
Half Coil Configurations
As previously stated, the half coil configuration uses 50% of the motor phase windings. This gives
lower inductance, hence, lower torque output. Like the parallel connection of 8 lead motor, the torque
output will be more stable at higher speeds. This
6-lead motor half coil (higher speed) connections
Full Coil Configurations
Lower speed is desired. This configuration is also referred to as full chopper. In full coil mode, the
motors should be run at only 70% of thei
6-lead motor full coil (higher torque) connections
NOTE:
THE ABOVE CONFIGURATIONS IS FOR CONNECTI
MICROSTEP DRIVE AS PER APPLICATION/
MICROSTEP DRIVE
.
Connections to 8-lead Motors
8 lead motors offer a high degree of flexibility to the system designer in that they may be connected
in series or parallel, thus satisfying a wide range of applications.
Series Connections
A series motor configuration would typically be used in applications where a higher torque at lower
speeds is required. Because this configuration has the most inductance, the performance will start to
degrade at higher speeds. In series mode, the motors s
current to prevent overheating
.
Parallel Connections
An 8 lead motor in a parallel configuration offers a more stable, but lower torque at lower
because of the lower inductance, there will be higher torque at higher speeds
Website:
E-mail id:[email protected]
BHOLANATH PRECISION ENGINEERING PVT. LTD.
As previously stated, the half coil configuration uses 50% of the motor phase windings. This gives
lower inductance, hence, lower torque output. Like the parallel connection of 8 lead motor, the torque
output will be more stable at higher speeds. This configuration is also referred to as half chopper.
lead motor half coil (higher speed) connections
is desired. This configuration is also referred to as full chopper. In full coil mode, the
motors should be run at only 70% of their rated current to prevent overheating.
lead motor full coil (higher torque) connections
THE ABOVE CONFIGURATIONS IS FOR CONNECTING IN A BIPOLAR
MICROSTEP DRIVE AS PER APPLICATION/NON-AVAILABILITY OF A
lead Motors
8 lead motors offer a high degree of flexibility to the system designer in that they may be connected
in series or parallel, thus satisfying a wide range of applications.
A series motor configuration would typically be used in applications where a higher torque at lower
speeds is required. Because this configuration has the most inductance, the performance will start to
degrade at higher speeds. In series mode, the motors should also be run at only 70% of their rated
8-lead motor series connections
An 8 lead motor in a parallel configuration offers a more stable, but lower torque at lower
because of the lower inductance, there will be higher torque at higher speeds
.
FOR HALF COIL CONNECTION
CONNECT
(A+)-A Com & (B+)
A Com-(A-) & B Com
FOR FULL COIL CONNECTION
CONNECT
(A+)-(A-) & (B+)
LEAVE A Com & B Com
Website:-www.bholanath.in
BHOLANATH PRECISION ENGINEERING PVT. LTD.
As previously stated, the half coil configuration uses 50% of the motor phase windings. This gives
lower inductance, hence, lower torque output. Like the parallel connection of 8 lead motor, the torque
iguration is also referred to as half chopper.
is desired. This configuration is also referred to as full chopper. In full coil mode, the
NG IN A BIPOLAR
AVAILABILITY OF A UNIPOLAR
8 lead motors offer a high degree of flexibility to the system designer in that they may be connected
A series motor configuration would typically be used in applications where a higher torque at lower
speeds is required. Because this configuration has the most inductance, the performance will start to
hould also be run at only 70% of their rated
An 8 lead motor in a parallel configuration offers a more stable, but lower torque at lower speeds. But
FOR HALF COIL CONNECTION
A Com & (B+)-B Com/
) & B Com-(B-)
COIL CONNECTION
) & (B+)-(B-)/
LEAVE A Com & B Com
