BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.
BHFitnessUSA
.com • Phone 949-206-0330 • Fax 949-206-0013
7
ASSEMBLY INSTRUCTIONS TS1 (cont
’
d)
T S 1
Don’t cut the packing belt until
removing the treadmill from the carton
and lay it flat on the floor as shown in
the drawing.
1. Pull out the control cable with the
guide thread attached in the right
upright (D), then feed the control
cable into the opening of the right
upright as shown. Tighten the left
and right uprights (C,D) with bolts
(a) and assemble them onto the
frame
Note
:. During assembling of the
upright supports, one person is needed
to hold the support in place while the
other tightens the bolts to avoid
unexpected accidents
a
C
D
WARNING!
UNDER NO CIRCUMSTANCES SHOULD THE TREADMILL BE ON ITS
SIDE