BH FITNESS BT6443 T200, Руководство пользователя

Страница: 18 / 23

BT6443/T200 Treadmill
- 17 -
E02(fault code) Explosion-proof protection
1.the power and voltage is
less than 50% normal
1.use the right power and
voltage
2.check the connection of
the motor or the motor may
damaged
2.connecting again
or change the motor
3.check there is special
smell of the controller or not 3.exchange the controller
E03(fault code)
1.failure to detect the motor
signal for 15 seconds or
above
2.failure to detect the sensor
signal for 10 seconds
1. check the installation of
the sensor and the magnet.
1.correct install the sensor
and the magnet
2.check the connection of
the sensor
2.reconnection
3.check the sensor if it is
damaged
3.chang the sensor
E04(fault code)
Failure study for the incline
motor
1.check the connection of
the VR line
1.reconnecting the joint of
the VR line
2.check the connection of
the AC line
2.reconnecting the joint of
the AC line
3.check the connection of
the motor line
3.reconnecting or change
the wires
4.check the motor if it is
damaged
4.change the motor
5.failure study
5.press the button on the
controller for3
second ,restudy again
E05(fault code) Over-current
1.make sure the power and voltage is comply with
standard
2.change the motor or controller, test again
E08(fault code)
EEPROM(data memory
error)
1. the part 24C02is broken or not connected 24C02 well.
2. change them immediately.