BH FITNESS BT6443 T200, Руководство пользователя

Страница: 17 / 23

BT6443/T200 Treadmill
- 16 -
Attention
：
1.
Check the power and safety lock is sure a valid state before start do exercise.
2.
When run into emergency, pull off the safety lock to stop the treadmill quickly
； ，
and put on the safety
lock, the system back to default, waiting for input the instruction.
3.
If there is any problem
，
PLS contact the distributor .Amateurs, do not attempt to disassemble or
maintain so as to avoid the damage of equipment
Simple troubleshooting methods
：
Fault Description Possible Reason Check Method Fault Processing
Power on , no
reaction in the
computer
1.power plug get loose
1.check the plug and make
sure the wire connect well 1.connect the wire again
2.power switch not open 2.check the switch 2.turn on the power again
The Motor Doesn’t
Work
1.Motor circuit abnormal
1.check the motor circuit, if
they are correct plug and
plug well
1.Replug the motor line
2. Not press the “START”
button
2.check the “START” button,
it may useless or not press 2.repress the button
3.the safety lock may lose or
dropped
3.check safety lock 3.place the safety lock
4.The motor plug loose or
damaged
4.test the motor 4.change the motor
5.The specification of the
power or the controller not
correct AC
（
110/230
）
V
5.make sure the
specification
Choose the correct
specification
The Motor and
Other Parts is ok,
but the Treadmill
doesn’t running
SENSOR induction bad
1.check the distance from
the magnet and the sensor
position
1.adjustment the distance in
5mm to the magnet
2.the wires may damaged or
not connect well
2.change the wires or sensor
3.the joints may not connect
well
3.connecting the joints again
The Display
Content not clear
PA circuit board screw not
clock well or the connector
not connect well
Check the circuit make it
connect well
Reset the connector and
lock the screw tightness
No pulse data
display
1.SENSOR induction
bad
1.check the wires’
connection
1.connect again or change
2.check the joints
2.connect again
2.human induction not
sensitive
（
ear clip
）
3.Knead the earlobe several
times.
Retest
3.human induction bad(hand
pulse
）
4.wetting hands or do some
friction.
Retest
E01(fault code)
the computer and the
controller Communication
abnormal
1.check the connection line
between the computer and
the controller
1.change the line
check the joints 2.connecting the joints
again