EN
35
EASYGO / EVO / NITRO / AWD USER MANUAL
Starting Pedalling
Before resting your feet on the pedals, you must sit on the seat and hold the handlebar fi rmly.Special care
should be taken if you start pedalling when using a high assistance mode (100%/BOOST mode, or 70%/SPORT
mode), as the motor will respond with maximum thrust and you may lose control. To facilitate acceleration, the
motor provides an additional initial thrust as soon as you start pedalling. So minimal force is necessary to put the
bicycle in motion, helping you to join the traffi c quickly and safely.
WARNING
Start pedalling with a short gear ratio (higher gears) and low assistance mode
(30% or ECO mode). As well as providing greater control and safety on the
bicycle, it requires less energy consumption and, therefore, ensures a longer
range. Please note that starting with a higher assistance mode (50%/NORMAL,
70%/SPORT, or 100%/BOOST modes), may put the user's safety at risk.
WARNING
When the user pushes the bike while walking alongside it, they must make
sure that the system is disconnected.
DISPLAY PANEL
Overview of the Display Panel
There are two Display Panels, depending on the model:
•
Side Display Panel, located on the left side of the handlebar:
2
1
3
4
6
8
5
7
9
1
2
3
4
6
8
5
7
9
Mando Remoto
Pantalla Central
•
Central Display Panel.Screen located in the centre
of the handlebar, with a remote control located on the
left side of the handlebar:
1.
POWER button.
2.
(+) button.
3.
(-) button.
4.
Lights indicator.
5.
Bicycle instant speed indicator.
6.
System error indicator.
7.
Pedal assistance mode indicator.
8.
Battery level indicator.
9.
Bicycle information indicator.
2
1
3
4
6
8
5
7
9
1
2
3
4
6
8
5
7
9
Mando Remoto
Pantalla Central
8
