16
8.1 Mechanical dangers
All moving parts on the machine (hammers and V-belt) are protec-
ted by permanent safety guards minimising risks and dangers related
to moving parts on the machine. No accidental removal of the guards
will be possible, as special tools will be required to dismount them.
WARNING
: operating the machine without the safeties will increase
your risk of getting injured.
8.2 Electric dangers
All machine parts staying under voltage are duly insulated or sealed
inside a casing to avoid accidental contact. For safety reasons all xed
casings can be only removed using special tools and equipment.
WARNING
: removing a xed protection casing when the machine is
running or without having priory cut the power off, may result into
major danger of electrical shock!.
When the splitter is fully obsolete and cannot be of any longer use,
itshould be duly dismounted ahead of discarding. Certain components-
need deactivation and dismantling in order to assure that no furtheru-
se is made by other parties and that no worn out parts are recycledfor
other applications.
During dismantle be alert for possible recyclable materials and com-
ponents that belong to differentiated waste collection procedures ap-
plicable in your country.
The manufacturer is not liable and undertakes no responsibility for
personal injuries or damages that may result from the recycling of
worn out machine parts for eventual re-use in other applications diffe-
rent than originally stated in this manual.
Take good note please:
each and every dismantling task must be
performed by authorized service centres or trained skilled staff only!
• Pull the machine down into single components
• Lock and clamp all moving machine parts
• Deliver each single component only to authorized waste manage-
ment facilities
Deactivated, clamped moving/driving parts and components are of
nofurther risk and danger.
7. DISMOUNTING/DISPOSING THE MACHINE
8. OTHER AREAS OF POSSIBLE DANGER
