background image

8

Strictly perform installation, set-up, maintenance, cleaning 

and transportation with the motor switched off and all moving 

parts firmly secured against accidental operation.

 

The  user  shall  strictly  comply  with  these  operation,  set-up,  mainte-

nance, repair and trouble-shooting instructions in order to assure safe 

operation and no damages to the equipment. The owner must under-

stand these instructions and must allow only persons who understand

these instructions to operate the splitter. Moreover we recommend to 

let the machine be run only and strictly by trained and skilled staff who 

must be familiar with the applicable occupational safety and health ad-

ministration rules as well as applicable transportation rules. Incorrect 

use of the splitter can cause serious injury or death.

No  person  under  school  leaving  age  should  operate  this  log  splitter. 

Those who have reached school leaving age but are below the age of 

16 may operate a log splitter if supervised by a competent person of 

18 years or over. The machine shall be installed and kept in a suitable 

location selected by the customer for safest operation. 

Make sure that the equipment stands on a safe stable foundation.

The working area around the machine must be kept as clear as possib-

le from surrounding obstacles and slippery foundation floors should be 

duly treated (do not use saw dust or wood ash for this purpose). Also 

make sure to comply with the following provisions: 

● Due and proper illumination of the working site must be provided

   at all times.

● Ensure that a wide but confined area is available around the machine   

   and assure maximum working freedom.

● A skilled licensed electrician must be asked for any repair of the

   electric system.

● Operators must wear steel toe safety shoes and snug-fitting tear-

   resistant work cloths.

● No additional customised protections or tools should be provided on

   board of the machine, other than the ones designed and supplied

   by the manufacturer.

● NEVER leave the machine unattended without prior power disconnection.

 

Operator‘s hearing protection, safety glasses, safety shoes and 

gloves, close fitting cloths and other adequate protection means are 

strongly recommended. 

Make sure that all access ways are properly maintained so that wood 

can be safely delivered, loaded and shipped.

4.  SAFETY RULES  

Содержание SP 30 HEH/S

























Отзывы: