BGS technic BGS 2999, Руководство пользователя

Страница: 5 / 12

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
SAFETY INSTRUCTIONS

Make sure the load is fully supported by the ramps.

Always use the ramps on even and stable or hard surfaces.

Do not use the equipment on sloping roads, sand or other soft surfaces.

Always use the ramps in pairs. Maintain the same height on both sides.

Always ensure that the load is secured or sustained in a way it does not move during work on
the vehicle.

Loads must never be pushed from the ramps.

All repair and maintenance work must be performed by qualified professionals.

Do not modify or alter the ramps in any way.

Do not use the ramps for tasks not described in these directions.

Do not use the ramps for three-wheeled vehicles or trailers.

Clean the ramps before each use by removing dirt and oil.

Secure the ramps in the loading area with safety belts or safety chains.

On using the ramps, always make sure the ignition key is removed from the vehicle to prevent
the engine from being inadvertently started.

Do not position the ramps at an angle of more than 45°.

Make sure the end of the ramp of each ramp points downwards. The other end must be in full
contact with the loading area.

Only use the ramps in pairs and do not use together with ramps from other manufacturers.

Keep children and other persons away from the loading area.

Always push the load onto the ramps manually.

Before loading or unloading, always align the ramps with the wheels of the load.
ASSEMBLY / TRANSPORT
Assembly of the support plate
for the loading area
Transport