SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
OPERATION INSTRUCTIONS
1.
Lubricate the tool before operating. See “CARE AND MAINTENANCE” section for oiling
instructions.
2.
Have the keyless chuck open by screwing at
counterclockwise direction by hand. (Fig.1)
Fig.
1
3.
Insert a drill into the chuck and then tighten the keyless chuck
at clockwise direction by hand. Make sure that the drill is
installed securely and tightened enough before operating the
tool. (Fig.2)
WARNINGS
: Only use drills that have an RPM
rating equal to or greater than the tool itself.
Fig.
2
4.
Remove the air cap from the tool air inlet and connect the air
supply hose to the tool. Set the working pressure at 90 PSI.
(Fig.3)
Fig.
3
5.
Push F/R valve (Part #8) downwards (to “F” position) and
press on the trigger. The tool starts to work. (Fig.4)
Fig.
4
6.
Push F/R valve upwards (to “R” position) and press on the
trigger whenever you feel it necessary to release the drill out
of the workpiece. (Fig.5)
Fig.
5
