SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 8852
Air Power Drill
SPECIFICATIONS
Drill Chuck Size:
0.8 – 10 mm
Max. Speed:
1800 rpm
Average Air Consumption: 6 cfm (170 L/min)
Working Pressure:
90 psi (6.3 bar)
Air Inlet:
1/4”
Air Hose (
recommended)
: 3/8” (inside diameter)
Length:
7.75” (197 mm)
Weight:
1.13 kg (2.49 lbs)
Noise Level:
LpA = 98 dB(A)
LwA = 101.2 dB(A)
Vibration Level:
ahd = 4.8 m/s
K = 1.5 m/s
IMPORTANT SAFETY INFORMATION
WARNING!
Read and understand and follow all instructions and warnings before operating this tool.
Failure to do so may result in personal injury and/or property damage and will void warranty.
Before first use, lubricate the air tool with 4 to 5 drops of pneumatic equipment oil.
Use proper air pressure and CFM rating listed for this tool.
1. Be sure air tool is in OFF position when connecting tool to air supply.
2. Avoid unintentional starting of the tool. Do not carry the tool with a finger on the trigger.
3. Always wear approved eye protection when using tools.
If
raising dust, wear a suitable mask.
4. Use only those accessories that are designed for use with tools.
5. Be sure to disconnect tool from air supply before changing accessories, performing service on
tool, and when not in use.
6.
As with any tool, use common sense when operating.
7.
Do not wear loose clothing or
jewelry
that could become caught by moving parts, causing injury.
8.
Operate tool a safe distance from yourself and others in the work area.
9. Device may only be operated with air maintenance unit incl. oiler
