23
Guidance and manufacturer statement - Electromagnetic Immunity
The ApexPilot is intended for use in the electromagnetic environment specified below. The
customer or the user of the ApexPilot shouId assure that is used in such an environment.
Immunity test
IEC60601 test
leve
Compliance Leve
Electromagnetic
environment - guide
Conducted RF
GB/T17626.6
3V(Effective
value)
150kHz~80MHz
3V(Effective value)
Portable and mobile RF
communications equipment
should be used no closer to any
part of apex locator, including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance
d=1.2
P
d=1.2
P
80MHz~800 MHz
d=2.3
P
800 MHz~2.5GHz
P—Where P is the maxi mum
output power rating of the
transmitter in watts (W) according
to the transmitter manufacturer;
d—d is the recommended
separation distance in meters (m)
Field strengths from fixed RF
transmitters as determined by an
electromagnetic site survey,
shouId be less than the
compliance level in each
frequency range.
Radiated RF
GB/T17626.3
3V/m
80MHz~2.5GHz
3V/m
NOTE
: UT is the ac. mains voltage prior to application of the test level.
NOTE 1
: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2
:These guidelines may not apply in at I situations. Electromagnetic propagation is
affected by absorption and reflection from structures objects and people.
a) Field strengths from fixed transmitters, such as base stations for radio (celIular/ cord less)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast can not be predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site survey should be considered.
If the measured field strength in the location in which the ApexPilot is used exceeds the
applicable RF compliance level above, the ApexPilot should be observed to verify normal
operation. If abnormal performance is observed, additional measures may be necessary, such
as re-orienting or relocating the ApexPilot.
b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
