bewello BW2002, Руководство пользователя

Страница: 5 / 39

USER MANUAL
General Instructions
Please read the following user guide and safety warnings carefully before using the device! Proceed as
described here during use! Please keep this manual for future reference! If you lend the device to someone
else, please send this documentation.
The appliance cleans with the power of steam, no chemical cleaner is required for its operation! The device
is designed for residential use! The device may only be used with factory accessories! Do not disassemble or
modify the device! In the event of a malfunction, contact a specialist who can repair your device with only
original parts! Please follow the safety instructions!
Symbols on the device
Risk of burns, the surface of the device may become hot during use!
Risk of scalding by steam
Read the instructions for use and proceed as described
First use
Remove all factory packaging from the device. After the first fill up, connect the appliance to the mains,
the appliance will start warming up. Check how to fill it up properly in intended point. During the first
commissioning, minimal smoke may escape from the steam nozzle, initially the steam exit from the
appliance may not be continuous, will be intermittent. After a short run-in (approx. 1 minute), the steam
output must be strong and continuous.
Use
Filling with water: Never release the water tank when the appliance is switched on, as this could result in
burns and damage to the appliance!
To release the water tank, press the „PUSH” button on the housing! You can remove the tank after pressing
the button. Remove the cap on the back of the tank. Make sure the filter in the cap stays clean at all times.
Fill the device with water through the filling opening and then put the cap on.
1. Fill the water tank with a maximum of 450 ml of water.
2. Put the cap back on.
Remark: It is recommended to use commercially available distilled water to prevent scale formation in the steam
boiler. Using hot water can shorten the heating time.