Start up
The appliance may only be used vertically, please also take care not to tilt the appliance too much during
use, as this may lead to insufficient steam generation.
1. Place the appliance on a solid base and hold by the handle.
2. Please make sure that the mains voltage is compatible with the device before connecting. Only with dry
hands should you hold the device! Connect the appliance to the mains!
3. Press the power switch and then enjoy until the right amount of steam is available. Steam escapes, the
steam will stop emitting when the button reappears. The LED on the front informs the user that the
device is switched on.
Switching off
1. Press the on / off button on the front of the device.
2. Wait for the remaining steam to leave the appliance!
3. Unplug the appliance. Attention! Never pull it by the cable, but by the plug.
Rinse the tank
This is necessary if you use non-distilled water during steaming. Using tap water can cause limescale in the
system, which can have a detrimental effect on the steam boiler’s performance in the long run.
1. Allow the appliance to cool down completely after switching it off.
2. Do not connect the appliance to the mains!
3. Disconnect the accessories attached to the device.
4. Fill the tank with water and rinse in a circular motion until the deposited limescale dissolves. Do not use
any chemicals for this operation.
5. Drain the water completely from the tank.
Check with your local water company for the hardness of the tap water available to you. The cleaning
processes must be concentrated in direct proportion to the hardness of the water. If the water is hard in your
area, please clean the appliance frequently so that you can use it much longer without any problems.
Water harness range ° dH
mmol/l
BF
1.
0-7
0-1,3
35
2.
7-14
1,4-2,5
30
3.
14-21
2,6-3.8
20
4.
>21
>3,9
15
Содержание BW2002
Страница 39: ...Product Nr BW2002...
