14
Bewacom Technical manual
Setting a password
The first thing to do is to set a password. You
will later use the password each time you want
to programme the Bewacom.
1
Open the Bewacom and turn it around so
the circuit board can be seen.
2
Press the SW1 button (see the wiring
diagram on page 10).
zz
3
Enter the desired 6-digit password.
4
Make a note of the password and store
the note in a safe place.
Setting Bewacom to programming
mode
To programme a function, set Bewacom to
programming mode.
1
Press and hold the B button on the
Bewacom keypad until the beeper goes
off an the yellow LED goes out (approx
3 seconds).
2
Enter the 6-digit password.
zz
