Chapter 8. Config. Network Settings
IP Video Door Station DS06M(P) Operation User Manual
40
End SIP session after door opening:
when the “open the door” command is received (the
door station receives the DTMF signal to close the relay outputs) the current SIP session ends. This
function can be set up for each relay output separately. This function is disabled by default.
Call timeout:
the amount of time during which the door station will call the subscriber.
Available values: 10~300 s.
Receive incoming calls:
Automatically receive incoming calls using the SIP account(s). If the
receiving account is not available the door station cancels the call and send the cancel message to
the caller.
Use call melody:
use standard call melody instead of the phone ringing sounds when calling
recipient via SIP.
Number of repeats:
set how many times the call melody should be repeated. If the value is
set to
«0» the ringtone melody will play an infinite amount of times.
Answer without sound:
when enabled the call recipient will see and hear the guest but the
guest will not be able to hear the recipient or be aware that the connection has been established.
Enable sound with command (DTMF):
set the value of the DTMF command (available
symbols: 0-9, #, *) used to enable sound transmission from the recipient to the guest.
Stop calling on beginning the talk via SW
: Automatically end calls, if the recipient answered
with the use of Beward software or compatible applications
.
End SIP session by pressing
“Call” button:
Enables the subscriber on the door station side
to end the SIP session by pressing the “Call” button. This option can be used
during the call
or
during the talk
. Both options are enabled by default.
Click
[Save]
to apply new settings.
