Chapter 8. Config. Network Settings
IP Video Door Station DS06M(P) Operation User Manual
35
NOTE:
When you connect to the device from the Internet the bitrate depends on the access channel obtained
from the ISP.
The
“RTSP”
settings menu is shown below:
Pic. 8.9
Enable:
enable\disable RTPS.
Enable Authentication:
Turn on the authorization procedure when getting access to the
RTSP
stream.
The
following
request
must
be
used
to
gain
access:
rtsp://<IP>:<PORT>/av<X>_<Y>&user=<USER>&password=<PASS>
, whee
<USER>
– username,
<PASS>
– password.
Request example:
rtsp://192.168.0.99:554/av0_0&user=<admin>&password=<admin>.
Port:
RTSP port. Default vale: 554.
Packet Size:
set the size of the data packet. Default value: 1460.
RTP multicast:
broadcast settings for audio and video streams in multicast networks
Press
[Save]
to apply new settings.
ATTENTION!
RTP multicast should be supported by your router.
