Chapter 6. Config: Audio Setting
IP Video Door Station DS06M(P) Operation User Manual
19
Chapter 6.Config: Audio Settings
The following picture shows the
“
Audio Parameters
” Menu.
Pic. 6.1
Enable the sound:
Turn on / off sound transmission. Enabled by default
Audio Input Type:
Default option
– «Mic». Unavailable to change.
Compression Type:
Default
– G.711U. Also available: G.711A и G.726.
Bitrate:
default
– 16000 bps. Unavailable to change.
Sampling Rate:
default
– 8 kHz. Unavailable to change.
Echo Cancellation:
Enable / disable additional echo cancellation. Use this option if the
hardware echo cancellation is insufficient.
Input Volume:
set the volume level of the input audio signal. (0~15).
Output Volume:
set the volume of the output audio signal (0~15).
Input Volume (Talk):
set the volume level of the input audio signal in Talk mode (0~15).
Output Volume (Talk):
set the volume of the output audio signal in Talk mode (0~15).
ATTENTION!
Adjusting the Input Volume and Output Volume parameters will affect the work of the device and may
cause defects (interrupted speech, echo, etc.)
Adjust these parameters only when it is strongly necessary..
Press
[Save]
.to apply new settings
