Creating the Machine Page
The last step to registering the machine is to create a new unit on the
dashboard. To create a new machine page, you will need a smartphone or
computer (recommended).
1. Navigate to well.bevi.co and log in with your registered Google account
(please contact Bevi Support if you do not have an account).
2. On the Inventory page, press the + New Unit button.
3. Fill in the client’s company and the desired unit name and click Create
Unit .
4. On the new page, fill in the following details:
a. Company and client contact information
b. Machine, Tablet, and optional OptConnect
TM
IDs
5. If the machine has been properly connected to the internet, the page
should update itself within a few minutes with the current inventory.
Final Steps
Purging the Carbonator
To ensure that the CO
2
and water mix properly, perform an initial carbonator
purge.
1. Turn off the carbonator then stop the main water flow.
2. Dispense sparkling water until the reservoir is empty and only CO
2
dispenses.
3. Turn the water and carbonator back on to refill reservoir. Ensure that
the water is turned on first.
4. Test the sparkling water and check the pressure gauge.
Flushing the Filter
It is important whenever a filter is changed to flush it first. To flush the filter:
1. Remove the water line from the outlet of the filter head.
2. Attach a small length of tube to the outlet, and let the free end hang
down into a bucket.
© 2018 Bevi. All rights reserved. [email protected]